ES6EI kirjutas:
Siiski veel niipalju, et 2m ei ole päris "limonaadilaine" - juhul, ebaõnnestunud ehitamine-häälestamine võib rahakotile üpris rängalt mõjuda.
Selleks tulebki õppida teiste vigadest, et neid ise mitte teha. MRFE6VP61K25H kannatab omajagu vägistamist,
elab üle veel 65:1 VSWR, seepärast projektid selle peal nii populaarsed ongi. Aga tark inimene ehitab
sellegipoolest kaitsed ja temperatuuriandurid juurde, nagu alljärgnevast saab lugeda.
Tsiteeri:
Even though the LDMOS transistor will handle 65 to 1 VSWR without failing (it's very tough), many of the other components, including the antenna switches and coax, can't survive the extreme voltages this would place on the transmission lines; so I set the SWR lockout adjustment at 100w reflected power, or about 2 to 1 VSWR at 1kw out. When tripped, this feature will lock the amplifier in bypass mode until manually reset (main power must be turned off for several seconds to reset it).
I'm sure glad I put that SWR lockout on there; while doing some offline testing, I forgot to hook up the output coax. I really didn't intend to test it at 1kw without a load, but it happened, and it locked out the amp just like it was supposed to do. No damage, even after I managed to do it again about an hour later.
Eraldi teema on muidugi aeg versus raha - kui ehitamisele kuluva aja eest saab ostule kulutatava raha
mitmekordselt tagasi teenida, siis loomulikult tasub osta, korpus on iga projekti kõige nõrgem osa.
Aga kui keegi tahab ikkagi ise ehitada, siis siin projektis on lõpus ära toodud ka eelarve, näeb, millega
tuleb arvestada, kui ise teha.
http://oz1bxm.dk/eme/SSPA-2m.html